STIGOfob

Product for surface protection - hydrophobic impregnation

Information

  • Protection and impregnation of mineral and highly alkaline, absorbent and porous building materials: concretes of all kinds, brick walls, tile, walls made of natural and artificial stone on a mineral basis, mineral plasters and coatings, silicate brick, asbestoscement panels, gasobeton.

  • Description: Plastic bottle of 1 l, plastic canister of 3 l, 5 l, 10 l and 25 l.

Consumption depends on the absorbency of the substrate, and should be determined by testing on a smaller surface area of the material to be treated. Below are the indicative consumption values:

  • beton 0.25 -0.5l/m2          
  • znoise 0.5 - 1.0 l/m2
  • withilicat brick 0.4-0.7 l/m2
  • about brick 0.4 – 0.7 l/m 2
  • plinobeton (siporex) 0.5-2.0 l/m2
  • andzbestcement boards (salonit,eternit) 0.1 – 0.3 l/m2
  • prirod stone 0.05 - 0.3 l/m2

STIGOPHOB is highly flammable and irritating!

Danger

Warning signs:

H225: Highly flammable liquid and vapor.

H319: Causes serious eye irritation.

H336: May cause drowsiness or dizziness.

Notification labels:

P102: Keep out of reach of children.

P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

P304 + P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P337 + P313: If eye irritation persists: Get medical advice/attention.

P403 + P235: Store in a well-ventilated place. Keep cool.

P501: Dispose of contents/container in accordance with national regulations - by handing over to a company authorized to collect this type of waste.

For detailed information, see the Safety Data Sheet.

Useful information

Technical documentation

The safety data sheet is available upon request.

Skip to content